Directly compatible with ZK's biometric reader controllers. Easy-to-use and intuitive programming with ZKAccess Software. No need to install software on each client. Programming of special logic between doors is set up with simple pull down menus.
No special scripts or code is required. Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode. 6 (2 Exit Device, 2 Door Status, 2 AUX).
12 (4 Exit Device, 4 Door Status, 4 AUX). 380mm(L) X 80mm(W) X 280mm(H). 380mm(L)×80mm(W)×280mm(H).
The KR Series is the main accessories line of external wiegand readers for all our access control devices. With an elegant and robust design, they are easy to connect and install, and offer the possibility to control one door from both sides. The LED lights indicate allowed or denied access.
They have a proximity reading range of up to 10cm in the E series case and up to 5cm in the M series case. The fact that this series is waterproof, and the operating temperatures can range from -20º to +65º, it is the ideal solution for outdoor installation. Also they can be connected with our C3 controllers. Read range of up to 10cm for proximity card and 5cm for Mifare card. KRxxx-E: Up to 10CM, KRxxx-M: Up to 5CM.
KRxxx-E: 26bit Wiegand (Default), KRxxx-M: 34bit Wiegand (Default). We will ensure that you are satisfied.