RFID Card Tag Reader Touch Keypad Password Door Access Control Magnetic Lock Kit. This is door access control kit, it can open door via RFID card or password.Package comes with everything for the system, include 280kg electric magnetic lock and 12V3A power. 1 x RFID reader keypad. 1 x 280kg electric magnetic lock.
1 x 12v 3a power supply. 1 x Door bell speaker. 1 x Set of screws. Contactless RFID transponder technology with power off data protection function.
Support offline work and full programming from the keypad. Support card, password, card+password to open door. Support master cards to add or delete user cards. Elegant appearance with clear numbers, convient to use.Support: Card, PIN, card + PIN. Valid password: General 1 set. Size: 120 x 78 x 22mm (4.72 x 3.07 x 0.86 inch). Weight: 123g (0.27 lb). Aluminum shell adopts high strength material, with hard anodised processing. Use magnetic power to lock the door, 280kgs (600lbs) holding force. Built-in reverse current protection device (MOV). Can be opened by push button, remote controller... Fit for wooden door, metal door, glass door, fireproof door... Corrosion resistant, durable to use. Current draw: 400mA 12V DC. Working Mode: Power-on to lock. Lock size: 25 x 4.7 x 2.6cm (9.84 x 1.85 x 1.02 inch). Plate size: 18 x 3.8 x 1.1cm (7.08 x 1.49 x 0.43 inch). Power supply switch is built-in EMI filter.
100% full load burn-in test. Low output ripple and noise.
Over load/over voltage/short circuit protection. Based delay control circuit, lock time can be in 0 to 15 seconds. Set NC / NO output, can control various types of electric locks. Can reduce the load of access controller, save wiring to reduce the hidden trouble. 110V to 240V, 50Hz to 60Hz.
Output voltage: DC 12V, 3A. Output contact: Access Control, Electric Lock, Release Button. Time relay: 0 to 15sec. Standard design: Steel material, Painted. Size: 120 x 95 x 38mm (4.72 x 3.74 x 1.49inch).
Weight: 326g (0.72 lb). 100% brand new entry/ out door access control switch. User friendly, push for openning the door. Compatible with most access control/ locking devices. Size: 85 x 85mm (3.34 x 3.34 inch).
Weight: 54g (1.90 oz). Speaker for door bell, must use with door system with door bell function. Power input is 12V, Red for positive, Black for negative. Green and Yellow wire connect to Bell connector on door system.
Bell ring is "Ding Dong" twice. Size: 6.5 x 9 x 2.5cm (2.36 x 3.54 x 0.98 inch). Brand new RFID tag with key ring. Compatible with all door entry system to gain access. Size: 36 x 26 x 6.6mm(1.4 x 1.02 x 0.26 inch).
Weight: 7.7g (0.27 oz). We do not provide pick-up service.We are a team of enthusiastic computer DIYer, love to build PC but have different problem same as yours. Heart is pain if missing a cable when installing a drive, or you need HDD case for M key SSD, but you bought B key. DIRECT is a channel for you to choose the right parts, and smoothly assemble computer. Let's empower your PC today. This item is in the category "Home, Furniture & DIY\Home Security\Door Entry Systems & Intercoms".direct_uk" and is located in this country: CN. This item can be shipped worldwide.