Full Complete 125kHz Door Metal ID Access Control Kit Keypad Strike NO Lock+PSU

DIY Complete Kit RFID Access Control System for Home / Office Use. Metal RFID Access Control +Electric Strike. NO Lock + 110-240V Power supply +. This is a widely used Access Control System for home/office/club/factory/hotel/School. It is suitable for the entrances and exits Security control. It strictly follows the national security products standard, All input /output are using anti-jamming protection and over-voltage/circuit protection. The product experiences the strict degradation test before leaving factory, The greatest advantage it is easy to install, with multifunctional & elegant design and reasonable price.

This system enables you to control who has access to your building. Locks and keys also allow you to secure your building, but when keys are lost or stolen, the inconvenience and expense of changing locks and re-issuing keys can be considerable. Keys may also be copied, creating even more security risks. If you want to check the hardware manual/wire Diagram or the system.

If you have any question, ask me freely and I will respond you within 12 hours. We only do quality product, quality service, because this is for security system. Welcome your question, any question is good question.

1 x Metal Door Access Control RFID Reader with Keypad. 5 x 125khz RFID Keyfods. 5 x 125khz RFID Cards. 1 x Door Release Button. Electric Strike Fail Secure NO Mode Lock. Power supply(110-240V input, 3A output, to power the whole system). X English User manual and Software. High quality and high security. Metallic case for better protection. Support entry modes : Password Only / ID Card Only / Password + ID Card. Can add card number and delete card number as your requirement.

Classical appearance with useful function. With lock relay output, secure / normal Mode, NO / NC output.

Built-in bell button can connect a external bell. Designed for home and office. Built-in proximity card reader (125KHZ ASK modulation). Built-in keypad for PIN code entry. Auxiliary input & auxiliary output.

8 Auxiliary Modes including : door ajar, forced door, shunt, door monitor, normal / secure. 2 status / programming interface LED'S. 3 user levers : normal user, secure user, master user. Code search feature that helps make maintaining user codes easier. Built-in case and back tamper bell, chime, siren, battery backup, tamper output features available with IBA power supplies.

Programmable lock strike release time. Input Voltage : DC 12 18V.

Input Current : - Standby : 40mA (not including attached devices). Max : 130mA (not including attached devices). Compatible Cards : ALL 26-bit EM cards. 76 (W) x 120 (H) x 27 (D) mm.

3" (W) x 4-3/4" (H) x 1 (D) inch. LockStrike Control Output : Collector open output (25mA). Auxiliary Control Output : Collector open output (25mA). Auxiliary Input (In / Monitor) : N. This AC 110V--240V Power supply controller is a transformer which provides stable output voltage for access controller, lock, and exit button.

Can reduce the load of access controller, save wiring to reduce the hidden trouble. Set NC / NO outputs, can control various types of electric locks. Based delay control circuit, lock time can be in 0-15 seconds. The circuit board has remote control port.

Output Voltage: DC 12V 3A. Outer Dimensions: 103 x 68 x 33mm. Holding 500kg Aluminum, Stainless Steel Bolt Testing to 1000000 cycles High-Temperature Painted, Duable and Beatiful Artical CE Certificate by European Union, MACertificate by China Public Security office. Lock Size: 150Lx39.5Wx34H(mm) lt structure: Stainless Steel Holding Stength: 500kg Voltage: DC12V Current: 200mA Fail secure, NO mode (Locked when power is removed) Suitable For: Wooden Door, Metal Door, PVC Door Surface Temperature: Within +20C Suitable Temperature: -10+55C(14-131F) Operating Humidity: 090% (non-condensing) Face plate Housing: Painted Steel Bolt Housing: Stainless steel, Draw the Polishing of silk Function: Built-out MOV Weight: 0.29kg.

125KHz RFID ID Cards / Keyfobs. These are 10pcs 125KHz RFID Proximity Keyfobs / ID cards, they can work with the product which has 125Khz RFID card reader. Each comes with Key ring included. Compatible with all RFID ID card reader to gain access. Each token pre-programmed with unique ID which is printed on it.

Voltage : DC 36V 3A Max. Dimensions : 87.7 (L) x 87.7 (W) x 44 (H) mm. Our products exported accross all over the world for more than 8 years. We care is the product quality, customer service. We have strong and professional experience on hardware, software, SDK and related tools. More importantly, we have passion and patience, we will support you until answering your question, bringing value to you, your company and your customer. We ensure our product quality, All our products are strictly tested before sending out. We will try our best to help you.

Feedback is very important to us. Feedback, so that we can satisfactorily address your concerns. This item is in the category "Home, Furniture & DIY\Home Security\Other Home Security".

The seller is "security-expert" and is located in this country: HK. This item can be shipped worldwide.

Brand: Unbranded
Frequency: 125kHz
Read range: 3-6cm
Modulation: ASK at 125kHz
Compatible Cards: ALL 26-bit EM cards, 125khz RFID Cards