Item Type: Electric Door Strike Lock Material: Iron Spray Powder. Voltage: 9-12V Installation Method: Left Front How to Use: 1. Fasten the lock body, lock head and door buckle shell to the door edge and frame with matching screws. The distance between the tongue of the lock body and the tongue of the buckle shell is about 5 mm.
Observe whether the weight of the door and the door closer (if equipped with a door closer) are ideal. If you find that the door is noisy or does not lock when closing, you can use a No. 12 wrench or pliers to turn the hexagonal screw angle and repeatedly adjust the load spring to When opening and closing the door, the tension is balanced.When the hook and oblique tongue is installed reversely, the inner unlocking can be changed to the outer unlocking, and the installation method is the same. Connect the wires at both ends of the lock to an AC/DC power supply of 9-12V, power> 12W, and then press the unlocking control switch.
Just press for 1 second, and the lock will automatically open. 1 x Installation Accessories Pack. We will reply your message within 48 hours.
If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls.
Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.