Door Access Control System Waterproof Electromagnetic Lock 180KG/350lbs Bracket. DC12V Access Control Electric Magnetic Door Lock. Holding Force with 180KG/350lbs / High Quality. This door lock is special in design with durable material.It can protect your home or business shops. Low operational and standby current. It's especially suitable for wooden, glass and metal doors. 100% brand new and high quality. Secure mode: NC model (Locked when power on, unlocked when power off). Especially suitable for wooden/ glass/ metal/ security doors. It is made from durable and high aluminum alloy material, durable for use. Can be opened by push button, remote controller, etc. Built-in reverse current protection device (MOV). Waterproof, can be installed outside. Suitable for wooden, glass, metal, security door. Lock Name: 180KG Magnetic Lock. Material: Aluminum alloy shell + iron plate. Working temperature: -20 to 55. Working mode: power-on to lock, power-off to unlock. Function: Can be used with building intercom, door access control system. Suitable For: Wooden, metal, security, glass door, etc. Fine workmanship design / Made of aluminium alloy / Sturdy and safety in using.
Holding force with 180KG(350Lbs). Built-in reverse current protection device(MOV). Waterproof, can be install outdoor. Suitable for wooden doors, glass doors, metal doors, fire doors. If your door is frameless glass door, then will need a U bracket.
Look at the door from the indoor, if the door is flat or the door to door frame is less than 3cm, you need to add the L bracket. If your door is open from indoor, then need to add the ZL bracket.
Put the dowel pin into the suction plate. The bonded washer make suction stronger.
Using the spanner and inner hexagon screws to fix the plate on the lock body. Close the door to test the pulling force, can add or delete the bonded washer. Surface of plate between with the lock body. For in-swing door, install the lock body inside and then need to.
Install the ZL bracket at the same time. Discharge the mounting plate from lock body. Fix the L bracket on the door frame and then fix the lock body on the L bracket. Assemble the Z bracket and then fix it on the door frame. Fix the armature plate on the Z bracket.This package is not including the power supply, access control keypad, exit button, door bell. This item is in the category "Home & Garden\Home Improvement\Home Security\Door Entry Systems & Intercoms". The seller is "rideksshop" and is located in this country: CN. This item can be shipped worldwide.