Door Access Control Kit RFID Keypad Power Supply Electric Strike Lock Home Tools

  

Door Access Control Kit RFID Keypad Power Supply Electric Strike Lock Home Tools. Card reading type: EM card. Identification method: card, password, card + password.

Open the door input: all the way to open the button input. Doorbell output: one way wired doorbell output. Can be connected to automatic door or gate. Working voltage: DC 12V ± 10%. Working temperature: 0 ° C 60 ° C. Surface Waterproof and dustproof panel. The ABS flame-retardant casing is integrally formed. After the installation is completed, a layer of glass glue can be applied to the back cover to achieve a comprehensive waterproof effect. (not IP65 waterproof, can't be used under the rain directly). Support RFID Card, password, RFID Card+ password to open the door. Support 1000 card and password user capacity, can set card + password to open the door, the safety factor is higher. Output Power: 36W Durability Test: 500000 times Input Frequency: 50-60Hz Input Voltage: 110-260VAC Output Voltage: DC12V/3A Working Temperature: -20 to +65 Time Delay: 0-15 seconds adjustable Relative Humidity: 0%-90% Dimension: 1006532mm. Support both NC Mode (Fail Safe Mode) &. NO Mode (Fail Secure Mode). Dimension:86X86MM (L / W). 125KHz rfid frequency key card. Operating frequency: 125kHz Detection range: 0-10cm Each card pre programmed and has a unique identity number on it. Please Noted: There are 5 color of the RFID keyfobs for optional (blue, red, yellow, green, black). We will send mix color by default.

If you need other color, please leave message to us. Kit3: Suitable for wooden door, metal door.

Package including: Access Control keypad + Power supply + NC type Electric Strike lock + Exit button + 10pcs Keyfobs. We will send the NC type by default, if you want NO type, please leave us a message. Working Voltage: 12V ± 10% Current: 200mA - 450mA Holding Force: 500kg Surface Temperature: Lower than room temperature +20 Working Temperature: -30-+60 Celsius Degree Operating Humidity: 090%(non-condensing) FeatureFail secure (NO), Fail safe(NC) Material: Stainless steel NC type strike lock: Locked when power on, unlocked when power off NO type strike lock: Locked when power off, unlocked when power on Size: 150 x 28 × 34mmL / W / H.

Kit4: Suitable for wooden, metal and Stainless steel door. Package including: Access Control keypad + Power supply + Electric Drop bolt lock + Exit button + 10pcs Keyfobs. Time delay: 0s, 3s, 6s adjustable Working current: Start state 1.2A ; Persistent state 120mA Coil type: Continuous working Security type: Electric power lock, unlock Lock core: The diameter og 12.5MM stainless coer, exteding the lengh of 15MM Locking mode: Magnetic induction Unlock Mode: Fail Safe (Locked when power on, unlocked when power off) Dimension: 150X34X28(L / W / H). Kit5: Suitable for wooden, metal and glass frame door. Package including: Access Control keypad + Power supply + 180KG Electric Magnetic Lock + Exit button + 10pcs Keyfobs.

Material: Aluminum alloy shell + iron plate Holding force: 180KG/350lbs Working Voltage: DC12V Working Current: 380-430mA Humidity: 0 to 95% Working Temperature: -10 to 55 Celsius degree Working mode: power-on to lock, power-off to unlock Waterproof: Yes. Kit6: Suitable for frameless glass door. Package including: Access Control keypad + Power supply + 180KG Magnetic Lock + U bracket + Exit button + 10pcs Keyfobs. If your door is frameless glass door, then will need a U bracket. Size of U Bracket: 130 33 26mm (L/W/H).

Kit7:Suitable for wooden, metal door. Package including: Access Control keypad + Power supply + 180KG Magnetic Lock + L bracket + Exit button + 10pcs Keyfobs. Look at the door from the indoor, if the door is flat or the door to door frame is less than 3cm, you need to add the L bracket.

Size of L Bracket: 170 34 25mm (L/W/H). Kit8: Suitable for wooden, metal, glass door. Package including: Access Control keypad + Power supply + 180KG Magnetic Lock + ZL bracket + Exit button + 10pcs Keyfobs.

If your door is open from indoor, then need to add the ZL bracket. Size of L Bracket: 1703425mm (L/W/H). Size of Z Bracket: 1384545mm (L/W/H).

Kit9:Suitable for wooden, metal and glass frame door. Package including: Access Control keypad + Power supply + E. 180KG Electric Magnetic Lock + Exit button + 10pcs Keyfobs.

Size of the Lock: 192Lx33Wx20H(mm) Size of Armature Plate: 139Lx32x11H(mm) Holding Force: 180kg(350Lbs) Input Voltage: 12VDC Current: 12V/120mA. The item "Door Access Control Kit RFID Keypad Power Supply Electric Strike Lock Home Tools" is in sale since Monday, February 15, 2021. This item is in the category "Home & Garden\Home Improvement\Home Security\Door Entry Systems & Intercoms". The seller is "rideksshop" and is located in Hong Kong. This item can be shipped worldwide.

1. Display Technology: LCD
2. Model: A1 kit
3. Maximum Resolution: 640x480
4. Country/Region of Manufacture: China
5. Battery Included: No
6. Working Voltage: DC12V
7. Color Mode: Color
8. Smart Home Compatibility: Other
9. California Prop 65 Warning: None
10. Location: Indoor/Outdoor
11. Surveillance Technology: IP/Network
12. Power Source: Electric
13. Connectivity: BNC
14. Type: Power Supply
15. Features: Magnetic Lock
16. Smart Home Protocol: Other
17. Year Manufactured: 2021
18. MPN: 2579884373
19. Compatible With: All
20. Access control power supply: DC12V 3A
21. Bracket: L/U/ ZL Bracket
22. Power: 30 W
23. Brand: OBO HANDS
24. Lock1: 180KG Magnetic Lock
25. Lock2: Electric strike lock
26. Lock3: Electric drop bolt lock
27. Security Mode: Fail Safe
28. Type1: Door Access control system
29. Screen Size: Not Applicable
30. Type2: RFID access control system
31. Unlock Mode: Password, RFID Card, RFID card+password
32. User Capacity: 1000 users
33. Working Frequency: 125KHz
34. Working temperature: 0 ° C ~ 60 ° C
35. Items Included: Access Control Kit
36. Voltage: 12 V