DIY Full RFID Card Door Access Control Kit Electric Strike Lock

DIY Full RFID Card Door Access Control Kit Electric Strike Lock. Adopt function steady card reader of blocks. Keypad Locks for 30 Seconds after 10 False Entries. Can be Connect with Door-open Button and Doorbell. Tamper Switch can be Connect to Security Alarm System.

88 x 88 x 21mm. 120(L) x 78(W) x 22(H) mm. This AC110V--240V Power supply controller is a transformer which provides stable output voltage for access controller, lock, and exit button. It controls electric lock directly. Help to reduce overload for access controller. Automatic protection function for unexpected short circuit or power off. NC/NO output modes selectable for various types of electric locks. This electric strike is a perfect choice to entry a building with card, biometric, code, or any other remote controlled open/close. Ideal for security doors, building entrance / exits. NC Mode - (Locked while supplied with power) Unlock Safe Mode. Performance Testing: 1000000 times aging test. Opening Mode: 90 degree swinging door. Authority Certification: CE & MA Approved.

Working Current: 0.2-0.45A. Dimension (Face Plate): 150mmx39.5mmx 28mm. This is the 125KHz RFID Proximity Card, it can work with the product which has the RFID card reader. Size:55mm x 86mm x 0.8mm.

This is a plastic Exit button, it is widely used in the door access control system. If you want to go out, you just need to press this Exit Button, then you can go out.

Support both NC Mode (Fail Safe Mode) and NO Mode (Fail Secure Mode). This is wire DoorBell, Very good using. 1 x Access control keypad. 1 x Electric Strike lock. Please verify your address during checkout.

We are not responsible for any wrong or undeliverable addresses. People always bought together with. This item is in the category "Home, Furniture & DIY\Home Security\Door Entry Systems & Intercoms". The seller is "suntekstore_uk" and is located in this country: CN.

This item can be shipped worldwide.

Brand: Unbranded
Type: Door Entry System