Door Access Control

DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit


DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit

DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit   DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit
DIY Complete Kit Fingerprint Access Control System for Home / Office Use. 4 Doors Fingerprint/RFID/PIN Access Control (one of them is waterproof) + USB Fingerprint Reader + ANSI Strike Lock + 110-240V Power supply +.

Infrared to Exit Button + RFID Keyfob. This is a widely used Access Control System for home/office/club/factory/hotel/School.

It is suitable for the entrances and exits Security control. It strictly follows the national security products standard, All input /output are using anti-jamming protection and over-voltage/circuit protection. The product experiences the strict degradation test before leaving factory, The greatest advantage it is easy to install, with multifunctional & elegant design and reasonable price. This system enables you to control who has access to your building.

Locks and keys also allow you to secure your building, but when keys are lost or stolen, the inconvenience and expense of changing locks and re-issuing keys can be considerable. Keys may also be copied, creating even more security risks.

If you want to check the hardware manual/wire Diagram or the system. If you have any question, ask me freely and I will respond you within 12 hours. We only do quality product, quality service, because this is for security system.

Welcome your question, any question is good question. Fingerprint+RFID+Password access Control Device(one of them is waterproof).

4 x ANSI Strike Lock(1000kg force, Keep locked in case of power failure, also can be adjusted to fail safe mode). 4 x Power supply(110-240V input, 3A output, to power the whole system). 4 x Infrared Exit Button. 20 x RFID Key fobs. X English unser manual and Software.

Aterproof fingerprint access control reader. Reliable, durable and highly accurate ZK fingerprint sensor with ver. 10 algorithm provides less than 1 second user recognition.

Complete setup and programming can be done via keypads and embedded firmware. Audio-Visual Indication for acceptance and rejection of valid/invalid fingerprints. Relay Outputs for electric lock and alarm. Inputs for door status sensor and exit switch. Supports multiple timezones and personnel groups for programming valid entry zones.

IP65 rated waterproof enclosure permits this reader to be used for outdoor applications. The data can be backed up to USB Pen Drive and can also be transferred to another reader in the absence of computer connectivity. Internal Proximity Card allows dual factor authentication for access control. FR1200 is a fingerprint reader with RS485 communication interface works with biometric access controllers and fingerprint standalone access control, including inBIO series controllers, F8 and so on. It offers the function of capturing and transferring fingerprint samples to access control panel inside to match.

With its IP65 rated rugged structure, FR1200 offers extra durability in all weather conditions including outdoor environments. Standard function: ID Card Module.

Optional function: MF Card Module. Dimension(WHD)mm: 5010237.3. Refused to fake the image. Support dry, wet, or rough fingerprin. Interface: USB1.1, compatible with USB1.0,1.1,2.0. Operating Temperature: -20°C - 50° C. This AC 110V--240V Power supply controller is a transformer which provides stable output voltage for access controller, lock, and exit button. Can reduce the load of access controller, save wiring to reduce the hidden trouble. Set NC / NO outputs, can control various types of electric locks.

Based delay control circuit, lock time can be in 0-15 seconds. The circuit board has remote control port. Output Voltage: DC 12V 3A.

Outer Dimensions: 103 x 68 x 33mm. Special design, easy to adjust the distance of the Lock-tongue. NC or NO mode can be adjusted. High-Temperature Painted, Duable and Beatiful Artical.

Designed for Metal Frame drill a hole, then install it directly. Lock Size : 4.88Lx1.26Wx1.30H(inch). Face plate Housing : Painted Steel. These are 125KHz RFID Proximity Keyfobs, they can work with the product which has 125Khz RFID card reader. Each comes with Key ring included. Compatible with all RFID ID card reader to gain access. Each token pre-programmed with unique ID which is printed on it. This exit button widely used in the door access control system. When you want to go out, you just need to press this Exit Button, then you can go out.

Performance Testing: 1000000 times aging test. Suitable For: Wooden Door, Metal Door, Glass Door, Fireproof Door, etc. Our products exported accross all over the world for more than 8 years.

We care is the product quality, customer service. We have strong and professional experience on hardware, software, SDK and related tools. More importantly, we have passion and patience, we will support you until answering your question, bringing value to you, your company and your customer. We ensure our product quality, All our products are strictly tested before sending out. We will try our best to help you. Feedback is very important to us.

Feedback, so that we can satisfactorily address your concerns. This item is in the category "Home, Furniture & DIY\Home Security\Door Entry Systems & Intercoms". The seller is "security-expert" and is located in this country: HK. This item can be shipped worldwide.

  1. Type: Fingerprint Access Control System
  2. Brand: Unbranded
  3. Fingerprint capacity: 3,000 User Finger templates
  4. ID card capacity: 3,000
  5. Transaction capacity: 60,000
  6. Sensor: Optical Sensor
  7. Algorithm version: Finger v10.0
  8. Communication: U disk, TCP/IP
  9. Wiegand signal: Wiegand26 Output
  10. Display: TFT LCD screen

DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit   DIY 4 Doors Bio Fingerprint Access Control Systems ANSI Strike Lock Power Unit