DIY 125KHz RFID ID Controler Access Control Kit + Keyfobs Electric Strike Lock

  
High quality and high security, sensitively and response quickly. Full programming from the keypad, support add/delete cards, set password, etc. Door bell button support external doorbell.

The keypad uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. This system uses power relay with 10A switching capacity provides an excellent switching performance for electric locks. This system is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

Card Type: Standard 125KHz EM. Door Open Time: 0-99 seconds. Wiring Connections: Electric Lock, Exit Button, Bell. Enclosure Material: PC + ABS. Product Weight: 3.53oz / 100g. Dimensions: 4-21/64"x2-51/64"x29/32 / 110x71x23mm. Material of Enclosure: Aluminum Alloy. Support external 12V backup battery. Backup Battery Type: 12V storage battery. Enclosure Dimensions: 4-29/64"x3-5/64"x1-17/64 / 113x78x32mm. Product Weight: 207g / 7.3oz.

Fail secure: Locked when power is removed. Dimension: 150Lx39.5Wx34H(mm) / 5.91Lx1.56Wx1.33H(in).

Reading distance: 3-10cm / 1.18-3.94in. Each keyfob has an unique ID number.

This kit com with a remote control which can open door remotely. The wireless signal can pass through walls, floors and doors. Operating Type: Momentary / Toggle / Latched. 1 x One-door access control. 1 x Electric strike lock. 1 x Power supply controller.

5 x ID cards (Thickness: 0.8mm/0.03in).