Cathode Lock Door Access Control Electric Strike Lock Set Home Security UK

  
WVC-600 micro-inverter, input and output are completely isolated, safe to use electricity. High-speed maximum power point tracking (MPPT), reverse power transmission. Support multiple parallel stacking, global voltage/frequency self-adaptation. High-accuracy voltage induction micro-grid mode, built-in electric meter, easy to install. Forward full-bridge topology high-frequency modulation grid-connected mode, stable and reliable. Item Type: Micro Inverter Material: Aluminum Alloy + Electronic Components Model: WVC-600 Applicable Scenarios: Solar Power Generation System (Roof, Outdoor) Product Use: Solar Power Generation Equipment Weight: Approx. 2295g / 81oz Product Size: Approx. 20.1x21.2x3.9cm / 7.9x8.3x1.5in. Solar Panel Open Circuit Voltage Range. Maximum DC Short Circuit Current.

Number of Connected Units Per String. Reverse transmission, load priority use. EN61000-6-1:2007 EN6100-6-3:2007+A1:2011+AC:2012. EN50549-1, EN 50549-2, NBR 16149:2013, UL1741.

IEC/EN 62109-1, IEC/EN 62109-2, IEC 62116, IEEE 1547. Inverter Installation Steps: Step 1: Fix the inverter on the bracket of the photovoltaic panel with the screws attached to the machine. Step 2: Connect the DC connection plug on the photovoltaic panel to the DC input terminal of the inverter with positive and negative poles. Step 3: Open the waterproof cover of the AC output connector of the inverter and connect the AC cable to the AC waterproof plug.

Step 4: Connect the AC output line to the AC main cable; Step 5: Repeat steps 1 to 3 to install and connect all inverters; Step 6: Connect the AC main cable to the mains grid to start your green energy journey. Note: Before installing WVC series micro-inverter products, please read this manual first and pay attention to the installation details. This manual contains important instructions that should be followed when installing and maintaining micro inverters.

In order to reduce the risks of electric shock and ensure safe installation and operation, always follow the following safety symbols that are present in this document to indicate dangerous situations and important safety instructions. 1 x Accessory Kit (2 x Screw, 2 x Nut, 4 x Accessory). Please allow 0-1 inch error due to manual measurement. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better.

We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.