Professional access control kit brand Zk teco designed to avoid any type of viral contagion, you do not have to interact or touch the system for its operation since the buttons are non-touch and the readers to be used with cards. Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals.
Reliable network system of controllers using either TCP/IP or RS-485 Serial communication. Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers. Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZKs biometric reader controllers. Easy-to-use and intuitive programming with ZKAccess Software. No need to install software on each client.
Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required. Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode. 380mm(L)×80mm(W)×280mm(H). The KR Series is the main accessories line of external wiegand readers for all our access control devices. Robust design, they are easy to connect and install, and other the possibility to control one door from both sides. Indicate allowed or denied access.
They have a proximity reading range of up to 10cm in the E series case and up to 5cm in the. The fact that this series is waterproof, and the operating temperatures can range from -20º to +65º, it is the ideal. Also they can be connected with our C3 controllers. 125KHz Proximity/13.56MHz Mifare Card Reader. Read Range: Up to 10CM(125KHz)/5CM(13.56MHz).Easy to install on Metal Door Frame or Mullion. Working mode: power-on to lock. Working temperature: -10 to 55 Celsius degree (14 to 131 Fahrenheit degree). Good quality and durable to use. Aluminum shell adopts high strength material, with hard anodised processing. Anodized aluminum, lock body and suction plate selected chemical electroplating antirust treatment. Magnetic power to lock the door, 280KG(600lbs) holding force. Built-in reverse current protection device (MOV).
Can be opened by push button, remote controller, etc. Fit for wooden door, metal door, glass door, fireproof door, etc. 1 x Gabinet and panel C3.400 ZkTeco.4 x Magnetic Lock 600 LB. 4 x Readers ZK Kr101.
The item "4 Doors ZK C3 400 Access Control Board Systems & 600lbs Magnetic Lock Power Box" is in sale since Thursday, June 25, 2020. This item is in the category "Home & Garden\Home Improvement\Home Security\Door Entry Systems & Intercoms". The seller is "comgsa777" and is located in Hialeah, Florida. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, Brazil, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Croatia, Chile, Colombia, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.